One of the most essential appliances in a home is the air conditioning system. It has to perform to maintain its efficiency.
If it fails to do so, then something must have gone wrong during the installation process. Sometimes, a faulty installation process can make your AC fail to perform satisfactorily.
An air conditioner needs to be placed in a specific environment to maximize its output.
Most of the technical details surrounding the installation of a new air conditioning unit are not widely known. It is where an HVAC contractor with expertise in air conditioning installation in Orlando comes in handy.
All confusion regarding the installation of an AC can be cleared if you follow the steps below:
1) Choosing The Right Size For Your Home
Buying an AC is easy, but choosing the one that best fits your budget and the correct size for your room can be difficult. It is recommended to hire an air conditioning technician who can help you with this.
The right size AC will help increase the efficiency of the unit as well as provide you with maximum cooling with low energy consumption.
2) Find A Reliable HVAC Contractor
Getting the proper installation of your AC can be difficult, especially if you plan on doing it without any experience.
Having an experienced professional help you with the process can save you a lot of time and effort. Not only do the professionals help you save money, but they also ensure that the unit performs efficiently and smoothly.
They provide a comprehensive guide on how to use the AC device and also teach you how to maximize its output. It is because, sometimes, the manufacturer might not be able to provide the necessary field knowledge.
3) Know The City Permits
Before you place a complex HVAC unit on your property, you need to make sure that the contractor has the proper permits.
These permits are required to inform your local government and the residents about the work that’s being done on your property. If the contractor you hire doesn’t have these permits, you may get into serious legal issues.
4) Hire A Professional Who Guarantees His Work
A good warranty is crucial for any contract, as it provides both the homeowner and the contractor with the necessary protection.
Unfortunately, some contractors do not provide comprehensive plans. If you want to have a long-term insurance policy, you must have it in place for at least a year.
5) Try Avoiding The Sub-Contractors
A factor you should consider when it comes to working with a company is avoiding using a subcontractor. Using a direct contractor can guarantee that the work is being done according to the company’s standards.
If you’re looking for a team of experienced professionals, check out the credentials of the individuals working for the company.
6) Timely Repairs And Maintenance
Make sure you get your AC installed by an HVAC contractor who offers timely repair and maintenance of the unit installed.
Knowing your system’s needs and hiring professionals for AC repair is advisable. It will help you maintain your AC system timely and improve its efficiency as well.
7) Understand SEER2 Ratings and Energy Efficiency Standards
When investing in a new AC system, understanding the latest efficiency standards is crucial for long-term savings. In Florida, the minimum SEER2 rating for new installations is 14.3 for split systems.
However, opting for a higher SEER2 rating, such as 16 or above, can significantly reduce your energy bills over the system’s lifetime.
Remember, while high-SEER2 units cost more initially, they often pay for themselves through reduced energy consumption, especially in Central Florida’s hot climate.
8) Ensure Proper Ductwork Inspection and Sealing
Before your new AC installation, insist that your contractor performs a thorough ductwork inspection. Studies show that typical duct systems lose 20-30% of cooled air through leaks, holes, and poorly connected ducts.
A professional HVAC contractor should evaluate your existing ductwork for proper sizing, insulation, and sealing. If your ducts are undersized for your new system, it can cause premature wear, reduced efficiency, and uneven cooling throughout your home.
Properly sealed and insulated ducts not only improve your new AC’s performance but also enhance indoor air quality by preventing dust, allergens, and humid outdoor air from entering your system.
Additionally, if your ducts haven’t been cleaned in several years, scheduling a duct cleaning before your new system installation removes accumulated dust, debris, and potential mold that could immediately contaminate your new equipment.
To get the services from the best air conditioning installation technicians, contact AmeriTech Air Conditioning and Heating at 407-743-7106 emergency services are available.
Clear a path from your entrance to the installation area and remove fragile items from walls that may vibrate during work. Secure pets in a separate room and cover nearby furniture with sheets to protect from dust. Ensure electrical panels are accessible and discuss preferred thermostat placement beforehand. Plan to be home during installation to answer questions and make decisions about unexpected issues that may arise.
Never install AC units in enclosed spaces without ventilation, near heat sources like stoves or water heaters, or where exhaust fumes can enter. Avoid areas with direct exposure to corrosive chemicals, excessive moisture like bathrooms, or locations that block emergency exits. Outdoor units shouldn't be placed under bedroom windows due to noise, beneath roof edges where ice can fall, or in flood-prone areas.
Indoor split AC units perform optimally when mounted 7-8 feet from the floor, allowing proper air circulation without creating uncomfortable direct drafts. This height ensures cool air naturally descends while warm air rises for recirculation. Mount at least 6 inches below ceiling level and 3-4 feet above furniture to prevent obstruction. Consider seated eye level to avoid direct airflow on occupants while maintaining efficient cooling patterns.
A properly installed AC runs quietly without rattling or vibrating, maintains consistent temperatures across rooms, and cycles on/off regularly rather than running constantly. Check that condensate drains properly without pooling water, all vents blow strong, even air, and your first electric bill aligns with expected usage. The system should reach set temperature within 15-20 minutes and maintain it without frequent adjustments needed.