Greater Orlando, FLGoogle GuaranteedLicensed CAC1817383

Heat Pump
Service.

AmeriTech Air Conditioning and Heating provides comprehensive heat pump service in Orlando, FL and the surrounding areas. Whether your system needs a tune-up to keep it running at peak efficiency, a repair to address a specific problem, or a full replacement assessment, our factory-trained technicians cover all of it — with the same licensed, insured team that has served Greater Orlando since 2009.

Tune-Ups & Maintenance

Annual & Bi-Annual Service Plans

Priority scheduling, repair discounts, automatic reminders.

Repairs

Same-Day Diagnostic Calls

Fully stocked service vehicles. Most repairs completed in one visit.

AmeriTech AC

What Heat Pump Service Includes

Heat pump service is a broad term covering everything from routine maintenance to emergency repair. When a heat pump is serviced professionally, the technician cleans the system, inspects all components for wear or damage, lubricates moving parts, checks refrigerant levels, verifies electrical connections and draws, and tests overall system performance. A thorough service visit catches small problems before they become expensive ones.

Regular heat pump service directly extends system life and maintains efficiency. A heat pump running with dirty coils, low refrigerant, or loose electrical connections works harder to deliver the same output — driving up energy bills and accelerating component wear. A clean, properly charged, correctly wired system operates as designed.

AmeriTech's service team covers all heat pump service types: annual tune-ups, diagnostic repair calls, new installations, and replacement consultations. Call (407) 532-8000 to schedule service.

AmeriTech AC

Heat Pump Tune-Ups & Maintenance

A heat pump tune-up is a preventive maintenance visit focused on keeping your system running at factory-rated efficiency. AmeriTech's maintenance service typically includes:

Cleaning indoor and outdoor coils to restore heat transfer efficiency. Dirty coils are one of the most common causes of reduced performance and higher energy bills.

Checking and adjusting refrigerant charge. Low refrigerant doesn't just reduce cooling capacity — it can cause compressor damage if left uncorrected.

Inspecting and tightening all electrical connections. Loose connections create heat, increase energy consumption, and are a safety concern.

Lubricating fan motors and inspecting belts and bearings.

Checking thermostat calibration and control board communication.

Inspecting the condensate drain for blockage — a particular concern in Florida's high-humidity environment where drain pans fill quickly.

Most technicians recommend an annual tune-up. In Florida, where heat pumps run year-round, twice-yearly service — before peak cooling season in spring and before the brief heating season in fall — gives you the best coverage. AmeriTech's maintenance plans make this easy: regular visits are scheduled automatically, with priority service status and repair discounts included.

AmeriTech AC

Heat Pump Repairs

Heat pump problems range from simple fixes to major component failures. Common issues our technicians diagnose and repair include:

Refrigerant leaks — identified with leak detection equipment, repaired at the source, and recharged to the correct charge per manufacturer specifications. Recharging without finding the leak is a band-aid, not a repair.

Reversing valve failure — the component that switches the system between heating and cooling modes. A failed reversing valve typically means the system is stuck in one mode only.

Compressor issues — from capacitor failures (a relatively inexpensive repair) to full compressor replacement (a major job that often raises the question of replacement vs. repair depending on system age).

Fan motor failure — outdoor or indoor air handler fan motors that have failed, are drawing excessive current, or are making noise.

Electrical control board failures, contactor failures, and capacitor replacements.

Iced-over systems — usually caused by low refrigerant, restricted airflow, or a failing defrost board, not by cold temperatures alone.

AmeriTech technicians arrive in fully stocked service vehicles carrying the most common repair parts. Most repairs are completed in a single visit.

AmeriTech AC

Heat Pump Installation

If you're installing a heat pump in a home that currently uses a gas furnace and separate central AC, or replacing an older system that's reached end of service life, AmeriTech handles the full installation process.

A heat pump installation starts with a load calculation — determining the correct tonnage for your home's square footage, insulation levels, window area, ceiling height, and local climate data. An undersized system runs constantly without reaching setpoint; an oversized system short-cycles, degrades humidity control, and wears components faster than a properly sized one.

Installation includes connecting the outdoor condenser and indoor air handler (or air handler upgrade if needed), refrigerant line connection and system charging, electrical connections to your load center, thermostat installation or compatibility verification, and full commissioning to verify the system is operating at spec.

AmeriTech is a factory-authorized dealer for Carrier, Rheem (Pro Partner), Trane, Bryant, Lennox, and several other major brands. Financing is available through GreenSky, Rheem KwikComfort (0% APR for 60 months, exclusive to Rheem Pro Partners), and Okinus.

Common Questions

Heat Pump Service FAQs

Do heat pumps need to be serviced?

Yes. Heat pumps require regular professional service to maintain efficiency and prevent premature failure. In Central Florida's climate, where heat pumps run essentially year-round, skipping service accelerates wear on coils, motors, and the compressor. A heat pump that hasn't been serviced in several years is almost certainly operating below its rated efficiency — costing more to run and wearing out faster. Annual (or twice-yearly) professional maintenance is the single most effective way to extend system life.

How do I service my heat pump?

There are a few things homeowners can do themselves: change or clean filters monthly during heavy use, keep the outdoor unit clear of debris and vegetation (maintain at least 18 inches of clearance around the unit), and keep the outdoor coil clean by gently rinsing it with a garden hose annually. Beyond that, the refrigerant system, electrical components, coil cleaning, and system performance verification require a licensed technician with EPA Section 608 certification. AmeriTech handles the full professional service side — call (407) 532-8000 to schedule.

What is the average cost of heat pump service?

A standard heat pump tune-up from AmeriTech is typically in the range of $89–$150 for a single visit, depending on system size and what's included. Diagnostic repair calls start with a service fee and the actual repair cost depends on the problem — minor repairs (capacitor replacement, contactor, thermostat calibration) run $100–$350; major repairs (refrigerant leak repair and recharge, reversing valve, fan motor) run $300–$800+; compressor replacement is a major job that often warrants a replacement vs. repair conversation. AmeriTech's maintenance plans offer tune-ups at a reduced rate with repair discounts included.

How often does a heat pump have to be serviced?

At minimum, once a year. For Central Florida homeowners whose heat pumps run year-round, twice-yearly service is recommended — a spring tune-up before peak cooling season and a fall check before the heating season. If you're on an AmeriTech maintenance plan, visits are scheduled automatically so you don't have to remember. If you notice reduced cooling or heating capacity, unusual sounds, or higher utility bills between scheduled visits, call for a diagnostic check — don't wait for the next annual appointment.

What does a heat pump service appointment include?

AmeriTech's heat pump service visit includes: coil cleaning (both indoor and outdoor), refrigerant level check (recharge billed separately if needed), electrical connection inspection and tightening, capacitor check, motor amperage check, thermostat verification, condensate drain inspection and flush, filter check, and an overall system performance assessment. The technician will report any concerns before billing for additional work — no surprise charges.

Keep your heat pump running right.

AmeriTech Air Conditioning and Heating has serviced heat pumps across Greater Orlando since 2009. Google Guaranteed, licensed under CAC1817383, factory-authorized across Carrier, Rheem, Trane, and other leading brands. For tune-ups, repairs, or replacement consultations, call (407) 532-8000 or schedule your service appointment online.